WAW Microcomputer Controlled Electro-hydraulic Servo Universal Testing Machine

    The machine has the oil cylinder of underneath type and of microcomputer control, electro hydraulic servo. It has the advantage such as high precision, easy to operate and large capacity of keeping record of data as well as indication of kinds of curves. It is suitable for doing testing experiments such as the tensile, compression, bending and shear testing for all kinds of metal materials and nonmetal materials such as plastic, concrete, cement and so on.

   WAW Microcomputer Controlled Electro-hydraulic Servo Steel Stranded Wire Universal Testing Machine

  The machine has the oil cylinder of underneath type and of microcomputer constant loading control, electro hydraulic servo. It has the advantage such as high precision, easy to operate and large capacity of keeping record of data as well as indication of kinds of curves. It is suitable for doing tensiletest and various performance tests for the steel stranded wire.

  Max. testing power：1000KN、600KN
  Testing range：0～1000KN、0～600KN
  Loading accuracy：＜±1%
  Max. tension distance：1000mm
  Piston distance：250mm
  Working voltage：AC380V
  Power of oil pump motor：2.0KW、1.5KW
  Feature：4 upright posts,Hard chrome plating,Easy to install the clamping device into the hydraulic jaw,
  Ideal tension position.

   WE Series Hydraulic Universal Material Testing Machine (add MC mark)

    It has oil cylinder put below, hydraulic loading, tested by pendulum, high precision, operat easily. It has three kinds of scale, and each has a full measure range. It can be used for the tensile, compression, bend and shear test of various metal material,plastic,concrete,cement and other nonmetal material.

    Technical parameter：
    Max test power：1000KN，600KN，300KN
    Load accuracy：< ±1%
    Work voltage：380V±%
    Max. tension distance： 640mm, 700mm, 620mm
    Width of flat specimen：0-40mm, 0-30mm, 0-15mm
    Clamping diameter of round specimen：Φ20-60mm，Φ13-40mm, Φ10-32mm
    Dimension size：1060*760*2400mm， 900*630*2300mm，800*500*1980mm

   WA Serial Universal Testing Machine (Digital Display)

  The machine has the oil cylinder of underneath type and of hydraulic loading control and pendulum test. It has the advantage such as high precision and easy to operate. It is suitable for doing testing experiments such as the tensile, compression, bending and shear testing for all kinds of metal materials and nonmetal materials such as plastic, concrete, cement and so on..

  Max. testing power：1000KN、600KN、300KN、100KN
  precision：Superior than grade 1.
  working voltage：380V±%
  Max.tension distance： 640mm、700mm、620mm、620mm
  Clamping thickness of flat specimen：0-40mm, 0-30mm, 0-15mm
  Clamping diameter of round specimen：Φ20-60mm，Φ13-40mm, Φ10-32mm
  Outside size：1060×760×2400mm，900×630×2300mm，800×500×1980mm

    STYE-2000C(3000C) Full Automatic Compression Testing Machine(add MC mark)

    It’s use to high-precision sensors and automatic computer control, and automatic overload protection function.It’s used to test compressive strength of building materials like concrete, cement, airbrick, firebrick, engineering ceramics, rocks in the laboratory of road, bridge, construction.

    Technical parameter:
    Max test power：2000KN(3000KN)
    Load accuracy：< ±1%
    Work voltage：380V±10% 220V±10%
    Distance of Piston：10cm

    Characteristic：
    Computer operation
    Constant loading
    Preservation of large data capacity
    Easy to operate

    STYE-2000C(3000C) Full Automatic Compression Testing MachinNEW

    The machine uses high-precision sensor and computer to automatic constant loading control. It has automatic overload protection function. It is suitable for the compressive strength test of building materials such as concrete, cement, airbrick, fire proofing tile, engineering ceramics and building stone in the laboratory of road, bridge and construction.

  Max.testing power：2000KN
  Grade：Superior than grade 1.
  Working voltage：380V±10%   220V±10%
  Piston lift height：30cm
  Feature：Computer operation,Constant loading,Large capacity of keeping record of data,Easy to operate

    STYE-2000T Compression Testing Machine

    STYE-2000TIt has oil cylinder put below, hydraulic loading, tested by pendulum, high precision, operat easily. It has three kinds of scale, and each has a full measure range. It can be used for the tensile, compression, bend and shear test of various metal material,plastic,concrete,cement and other nonmetal material.

    Technical parameter：
    Max test power：2000KN，1000KN，800KN,500KN,400KN,200KN.
    Load accuracy：< ±1%
    Work voltage：380V±10%
    Easy to operate
   

  STYE-2000 Compression Testing Machine (add MC mark)

    STYE-2000Compression Testing Machine，It’s use high-precision sensors and digital display devices can according to test requirements automatically print test results.It’s used to test compressive strength of building materials like concrete, cement, airbrick, firebrick, engineering ceramics, rocks in the laboratory of road, bridge, construction.

    Technical parameter:
    Max test power：2000KN
    Load accuracy：< ±1%
    Work voltage（V）：380V±10%
    Dimension size：1385*1140*630
    volumeter：1M³
    weight：850KG

    Characteristic:
    Controlled by single-chip computer
    Automatic print
    Distance of Piston：10cm 5cm
　

  STYE-2000B(3000B) Compression Testing Machine (add MC mark)

    STYE-2000BCompression Testing Machine，It’s use high-precision sensors and digital display devices can according to test requirements automatically print test results.It’s used to test compressive strength of building materials like concrete, cement, airbrick, firebrick, engineering ceramics, rocks in the laboratory of road, bridge, construction.

    Technical parameter
    Max test power：2000KN,3000KN
    Load accuracy：< ±1%
    Work voltage（V）：380V±10%
    Electricity machine：0.75KW
    Distance of Piston：10cm
    Characteristic：Screw electric lift
    Controlled by single-chip computer
    Automatic print

   STYE-300 Electro-Hydraulic Antiflex Flexural Compression Tester (add MC mark)

     It’s use the high-precision sensors and digital display devices.It can automatically print test results Used as the compression tester and flexural strength of concrete in laboratories of road industry, bridge industry, construction industry, etc.
    Technical parameter
    Max test power：300KN
    Load accuracy：＜±1%
    Rated pressure of liquid pump：25Mpa
    Diameter of bending roller：Ф30mm
    Max. distance between upper roller and bottom roller：165mm
    three phase ：
    Working voltage：380V±10％

    features：
    Maintain peak
    Automatic Data Processing Test Automatic

   STYE-300C Full Automatic Antiflex Compression Testing Machine (add MC mark)

    STYE-300CFull Automatic Antiflex Compression Testing Machine is use full computer control, standard keyboard input test data, automatic storage and processing, automatic printing, constant loading rate, the loading rate can free set and have automatic protection devices. It’s mainly use for determinat cement block anti- pressure strength and flexural strength

    Technical parameter:
    Max test power：300KN 10KN
    Load accuracy：< ±1%
    Afterburner speed：2.4KN/S ±200N／S 50N/S ±5N/S
    Max test room（mm）：250＊230 220＊160
    Work voltage（V）：380V±10%   220V±10％

    Characteristic：
    Bending resistance composite cement two use.
    Computer operation
    Constant loading
    Preservation of large data capacity
    Easy to operate
　

    STYE-2000J Rock anti-cuts and anti- pressure tester
    It use the hydraulic pressure to add holland, electronic measurement power, with the max. load and load figures show that the function of maintaining data protection .

    Technical parameter：
    Max tester power：2000KN
    Show value relative precision：<±1%
    Bearing plate size：320mm*260mm
    Max.distance between top and bottom plate：310mm
    Piston max. distance：90mm
    Anti-cuting jack：1000KN
    Anti-cuting serse：1000KN
    Apparature size：96*480*1170mm
    Net weight：约1000kg

    STYE-5000 Rubber Bearinganti-Cuts and Anti- pressure Tester

    Technical parameter：
    Max tester power：5000KN
    Max cutting power：500KN
    Max.use pressure of pump：31.5MP Displacement pump（L/min）：3-4L/min
    Bearing plate size（mm）：740*740*175MM
    Piston max. distance（mm）：100MM
    the distance of column （mm）：750MM
    Work voltage：380V±10%（three phase and four lines），220v±10%
    machine size：1100*800*2700MM
    Control cabinet size：480*800*2700MM
    Electricity machine（kw）：3KW

    STMGY-1 Steel Wire Strand Anchor Coefficient Determination Apparatus (Passed provincial level examination )

  The machine uses computer to carry on data processing, preservation and printing. Has the pulling force, displacement automatic tracking survey. Max. load peak value maintains, increase proportion automatic detection. The tentative data can arbitrary access and can automatically extract material performance index .then prints the integrity test report. It’s suitable for profession domain universities, colleges and institutes, factory and mining enterprise, quality surveillance department, measurement examination to raw material, component and product carries on mechanics performance examination and the analysis ideal check-out facility。

    Technical parameter:
    Test rang：0-4000KN, 0-5000KN, 0-6500KN
    Displacement Precision：0.1 mm
    Piston max. distance：0-200 mm
    Characteristic:It’s use PC acquisition, data processing software, components and easy to use

   STYJG-500 Manhole Cover pressure tester

  It’s use to compressive strength test for the test other be used to test mechanical properties of materialsIt’s use hydraulic loading of the aircraft, electronic measurement, with the Max.load and load figures show that the function of maintaining data protection and power outages. Automatic processing of experimental data and print out test report

    Technical parameter：
    1.Max test power：500KN
    2.measure range and Measurement range：0-500KN
    3.relative error：±1%br>      4.Load board size￠995mm、800mm×800mm
    5.Max.distance between top and bottom plate：270 mm
    6.Piston max. distance：90 mm
    7.Piston diameter：￠250 mm
    8.Piston diameter：40Mpa
    9.Three-phase Working voltage
    10.Outer dimension：1180mm×1000mm×1300mm(L×W×H)
    11.Net weight:about 1000㎏
　

   STSCJ-300Microcomputer Controlled Tensile Stress Relaxation Testing Machine

Performance Characteristic：
It has the relation curve between the remaining testing power or the relaxation rate and the time.
It can calculate the stress relaxation of the specimen at the time of 1000 hours.
It has the loading speed as per 100-5000N/S (it can freely set).
It can automatically calculate the stress relaxation (such as stress relaxation rate) and print the complete testing report.
The load and the displacement are calibrated by numbers.
It has the functions such as keeping record of the test result and consulting and traversal the testing process.
Automatically adjust the coordinates: The system can automatically adjust the coordinates
under the testing condition. It shows the complete curve in the whole test procedure.
Test parameter: The test parameters can be automatically saved, assigned out and also can be re-settled.
Data collection: You can use the mouse in the assay curve to collect the data after finish the test.
Technical parameter： Max. testing power：300KN
Available measuring range：12~300KN
Indication error：＜1%
Loading precision：10N
Loading speed：100~5000N/S
Length of the lead screw：100mm
Testing space: 850mmMax. distance between the left and the right collets.
Power：AC220V±10% 1.0KWx
　

    STSL-80 home location Drang mochine

    一. Technical parameter：
    Sdandard power：40KN
    Max test power：50KN
    Sdandard Distance of Piston：20mm
    Max test power：25mm
    Load accuracy：±3%
    up Bearing plate size：400mm×240mm
    weight：104kg、boead- jack7kg
    down Bearing plate size：240mm×240mm
    oil-volumeter：2l

    STZCL-500 High Strength Friction Grip Bolt Survey meter

   Measuring range：M16～M30

   Max. power range：500KN    Precision：0.1KN

   Working voltage：220V±10%

   torquemoment1：0~1000N.m

   torquemoment2：0~2000N.m

   STFJ  reaction frame

   Mainly used for the Jack’s calibration

   Max. load:

       3000KN,4000KN,5000KN,6000KN,,8000KIN,9000KN

    STDD-1 reinforcing steel barconcatenationget ready bribemachine

    Technical parameter

    move one time，it can do 40 point

    destance of the pointis10mm

    Reaction Force Framework

    Mainly uses in the concrete beam's examination

    Max. load：500KN  1000KN