|
|
STLZ-3D Low Temp. Double-digit Display Asphalt Penetration Apparatus(add MC mark)
Technical parameter
Total weight of standard pin, pin rod and weights：100g±0.5g
Default time5seconds，alternatives time:1～99seconds
Measurment range：50mm（500Penetration）
Measurement accuracy：±0.01mm
Temperature control accuracy：±0.1℃
Work temperature：0℃～70℃（can free set） |
|
|
STYD-2 Digital Asphalt Ductilimeter tester (add MC mark)
Technical parameter:
Extend speed：50±2.5mm/min
Max extend degree：1500mm，2000mm
Heat range：room temperature～50℃can be set
Temperature control accuracy：±0.5℃
Work voltage：AC220 50HZ |
|
|
STYD-3 Digital Low Temperature Asphalt Ductilimeter (add MC mark)
STYD-4 Digital Low Temperature Asphalt Ductilimeter ( with dynamometer and add MC mark)
Temperature control range：0～50℃
Temperature control accuracy：±0.5℃
Accuracy in full ductile：±1mm
Dductile speed：50±2.5mm/min
10±1mm/min
Max ductile length：1500mm，2000mm
Heat power：1.5KW
Refrigerat power：1.75HP
Surevy power range：0-2KW
Import compressor,
Feature：Both inside and outside stainless steel |
|
|
STYD-5 Micro
computer Control Low Temperature Digital Asphalt Ductilimeter
Temperature control range：0-50.0℃
Temperature
control accuracy：±0.5℃
Accuracy
in full ductile：±1mm
Dductile speed：50±2.5mm/min
10±1mm/min
Max ductile length：1500mm，2000mm
Refrigerat power：1.75
HP
Heating power：1.5KW
Dynamometric range：0~2KN
Feature：Import
compressor, Both inside and outside stainless steel
|
|
|
STBX-82 Rotating Bituminous Membrane Oven
The Oven is mainly used for determining the quality loss after heat up roadway pitch film. at the same time, according as the loss assess pitch endure aging capability.
Technical parameter:
Heat power：2.8KW
Temperature range：50～200℃
rev：6rotate／min
Work room size：450mm×450mm×550mm
Voltage：AC220V |
|
|
STBX-85 Rotating Bituminous Membrane Oven
The Oven is mainly used for determining the quality loss after heat up roadway pitch film. at the same time, according as the loss assess pitch endure aging capability.
Technical parameter:
Heat power：2.8KW
Temperature range：50～200℃
rev：6rotate／min
Work room size：450mm×450mm×550mm
Voltage：AC220V |
|
|
STLN-2 Electric Asphalt Viscometer
Diameter of the orifice：3±0.025mm
4±0.025mm
5±0.025mm
10±0.025mm
Specimen cansiter tube：Die diameter40mm
Depth：105mm |
|
|
STYDN-3
Asphalt kinematic viscosity Determination
Power voltage：（10～10%）50Hz（±2%）
relative humidity：10～<85%
silm tube viscosity tester：13pics is one group Die diameter：0.4、0.6、0.8、1.0、1.5、2.0、2.5、3.0、3.5、4.0、4.5mm；BMN-2，two pics，
Die diameter5.0、6.0mm（其中5.0和6.0二种毛细管粘度计不附系数，需用户自行校测）
Temperature control：20、40、50、80、100、135℃
Temperature control accuracy：±0.01℃
Determinat viscosity：6～100000mm/s
Power of the heater：1000W
(can control) |
|
|
STDN-3
Asphalt dynamic viscosity detector
Power：220V
AC
Temperature
accuracy：±0.02℃
Pruessure range：300±0.5mmHg
Timing range：999.9S
Timing
precision：
≤0.05%
|
|
|
STLR-3 Electric Asphalt Flash Point Tester
It's use to determine all kinds of pitch bolt and fire point
Power voltage：220V±10%
Can adjust the rise temperature speed |
|
|
STWDS-1 Asphalt Particle Ionic
Charge Testing Apparatus
This apparatus if
designed and manufactured according to the transportation
professional standard JTJ052-2000 T0653. It is used to determine
the ionic charge of the asphalt particle.
Technical Target：
working power：AC220V±10%；50HZ
working Enviroment：room
temperture<35℃
testing voltage：DC6V |
|
|
STWDX-1 Asphalt Storage
Stability Testing Machine
Glass test cube：
Useful height：310±10mm
Guide line：250ml
Input of the specimen：Φ32±0.1mm
Base is made of the
chromized steel plate 10mm and reliable.
The clamping
structure of the glass test tube is unique and can be adjusted up
and down.
The whole design
structure is reasonable and beautiful. |
